Differences

This shows you the differences between two versions of the page.

--- en:openserial [2016/08/12 21:28]
admin
+++ en:openserial [2020/02/28 10:46]
@@ Line 1: / Line 1: @@
-===== OpenSerial (Statement) =====
-==== Format ====
-**openserial** [[integerexpressions|open_file_number]], //port_name//\\
-**openserial** [[integerexpressions|open_file_number]], //port_name//, //baud_rate//\\
-**openserial** [[integerexpressions|open_file_number]], //port_name//, //baud_rate//, //data_bits//\\
-**openserial** [[integerexpressions|open_file_number]], //port_name//, //baud_rate//, //data_bits//, //stop_bits//\\
-**openserial** [[integerexpressions|open_file_number]], //port_name//, //baud_rate//, //data_bits//, //stop_bits//, //parity//\\
-**openserial** [[integerexpressions|open_file_number]], //port_name//, //baud_rate//, //data_bits//, //stop_bits//, //parity//, //flow_control//\\
-==== Description ====
-This statement opens a serial port on your computer for inoput and output.  It uses the same file numbering as [[open|open]] and [[open|openb]] and most of the file control statements can be used to get and send data to a serial port.
-===Baud Rates===
-|300||
-|1200||
-|9600|DEFAULT|
-|19200||
-|38400||
-|Others are possible||
-===Data Bits===
-|5||
-|6||
-|7||
-|8|DEFAULT|
-===Stop Bits===
-|1|DEFAULT|
-|2||
-===Parity===
-|0|None|DEFAULT|
-|1|Odd||
-|2|Even||
-|3|Space||
-|4|Mark||
-===Flow Control===
-|0|None|DEFAULT|
-|1|Hardware||
-|2|Software||
-==== Note ====
-BASIC256 may have up to 8 files open at a single time.  The files are numbered from 0 to 7.  Opening a file to a number while another is already open to that number will close the open file.
-==== See Also ====
-{{page>en:start#File and Serial Port Input/Output&noheader}}
-==== History ====
-|1.1.4.0|New|

DokuWiki

User Tools

Site Tools

Differences

Page Tools